Throttle body clamps?

[Ninjabogey]

Hi

Looking to improve the clamps from the engine to the throttle bodies. Jubilee clamps just aren't man enough.

I have looked at Mikalor on eBay but was looking for something narrower.
Any suggestions and where to buy in the uk?

Cheers
Paul

[GIXERHP]

Well it seams that the clamps have been fine on these bikes for over 10 years now!
What are you trying to do, here?
Is it a turbo bike?

[ROTREXPOWER]

you need to strap the plenum down, not rely on the hoses to hold it all together. We have plenums that don't use hoses or clamps now, check out our facebook.
HAYABUSA GEN 2 BILLET PLENUM CHAMBER | Facebook

[Ninjabogey]

Supercharger setup and my tts plenum is braced.

Damaged one of the standard clamps and swapped with stainless jubilees but they compress the rubber too much. Hence looking for a narrow Mikalor type clamp to replace/upgrade.

[GIXERHP]

Well that makes more sense here then!

Supercharger setup and my tts plenum is braced.

Damaged one of the standard clamps and swapped with stainless jubilees but they compress the rubber too much. Hence looking for a narrow Mikalor type clamp to replace/upgrade.

[ROTREXPOWER]

Email me and I will see if I can point you to a local supplier, please put where your from
richard@tts-performance.co.uk

[Kojak]

Think you mean theese.......... from the engine to the throttle bodies. Fit 100% GEN 1 Busa. I forgot that I have it....... bought it for years ago ....

ImageShack Links Do Not Work

Uploaded with ImageShack.us

[Ninjabogey]

Email me and I will see if I can point you to a local supplier, please put where your from
richard@tts-performance.co.uk

Thanks Richard. Email on its way.

Cheers