Stock Exhaust Mods

[hib61]

Proud new owner of a Silver and Blue '04. Just traded in a '02 VTX 1800 that had V&H exhaust and Power Commander. The 1800 used to rip up my friends CBR600RR up to 80. I got tired of him cleaning me up above that. Also since the wife doesn't like to ride I figured I didn't need a cruiser anymore. Needless to say the Busa has all the torque I'm used too plus gobs of horsepower. I am still under 600 miles so I keep it below 5500 rpm. Still stronger than an Ox. It may be a year to two before I fully exploit the full potential of this beast. I would however like a stronger exhaust note. Like i said power is not the issue. What is the least expensive way to hear more sound? Can the factory exhaust be modified? I don't really want to spend the bucks right now on a 4-2-1 exhaust nor do I want to buy two new cans just for some more noise. any suggestions?

[BigBSBusa]

Hib, where are you in Olathe? I'm right up the street in Leavenworth! The stock cans can be modified, but most would recommend against it. There was a post a couple weeks ago from someone that did it.

[BigBSBusa]

Found the link. Here it is:

[hib61]

I'll probably wait until winter to try anything. I live close to 151st and Black Bob. I remember when I was in Houston(2001). This guy had a crotch rocket, can't remember what is was but the exhaust came up under the seat. His bike sounded real throaty like a big block. Sounded real good.

[BigBSBusa]

We have been trying to get some local KC/MO riders together and haven't had much success. Did you get yours from Olathe Suzuki?

[hib61]

Freedom in Grandview. They were butt heads at OS

[monsterspeedfreak]

Personally I wouldn't bother screwin around with yer stock cans.
Post a wanted add, and get some good used bolt-ons.
Welcome to the board too!!!

[Revlis]

You pull your stock cans, clamp em in a big vise and drill a series of holes in the inside baffle, your going to need a Looong drill but from what I heard it will give you some extra noise...

[VaBusa]

My husband did just that to my stock exhaust a few weeks back...HUGE difference in the sound...

Ask Postal...he noticed it last week when we went riding...he's got D&D bolt-ons and I could still hear his over mine when we were riding, but he said when I took off, he knew my stock exhaust had been modified...

Hubby drilled 3 1-inch in diameter holes in the baffles...sounds damn good and was very cheap!!

[birdwah]

warning click the link from big busa above i just posted on stock cand mods be careful