Powder Coating Part 2

[SSGT_B]

I did the headlight ring a while back so I finally got around to doing the running lights and signal lights. There’s definitely a learning curve to it and I’m sure as I do more. It will get better, but it didn’t come out that bad.

De-pin the connections to take apart.

Out gas’s the parts for 30 min after cleaning with acetone and scrubbing with steel wool.

Finished product

 

[Bumblebee]

I did the headlight ring a while back so I finally got around to doing the running lights and signal lights. There’s definitely a learning curve to it and I’m sure as I do more. It will get better, but it didn’t come out that bad.

De-pin the connections to take apart.
View attachment 1681828

Out gas’s the parts for 30 min after cleaning with acetone and scrubbing with steel wool.

View attachment 1681829

View attachment 1681830
Finished product

View attachment 1681831

View attachment 1681832

View attachment 1681833

Pretty darned good job.....

It looks great like that.

 

[WuzzaCBXRider]

Nice! I found a shop that did the cans on my 06 for $30 each. Very good job.