Please Help Quick!

[Speednut]

My bike is in pieces. I am no electrician and this may sound so dumb, but I dont want to redo everything twice cause i messed it up. The integrated taillight says connect each yellow turn signal wire coming from CA fixture to one positive turn signal wire from bike. I believe that positive wire is green. So then, what do I do with the black wire with the stripe on it for each side? does it connect to anything? Please help me. I am not using any resistors cause i like the faster blink rate, and it stays cooler too. Thank you guys.

Steve

[Speednut]

CA meant clear alternatives by the way... sorry.

[Speednut]

theres gotta be someone with wiring experience on these or other such taillights? I just need to know what to do with those extra black striped wires... anybody?

[goodluck]

i dont think you do anything with the black wires

[Speednut]

thanks goodluck, im just going to try it out like that. not many people with this setup i guess...

[TXBusa05LE]

Pics always help...

[99'busa]

usually green is a ground

[Fate]

The Black wires are not used if I remember, leave them disconnected. My busa is 1200 miles away or I would look for you.

[MC MUSTANG]

B/W off of the tail light/ turn signals is ground, the light green and black coming off the R and L sides respectively are Pos (+)

[Busa Jules]

I just sent one of these to chrisr in pay it forward.... I never installed it.. so no help... good luck... plus my mechanic handles all of that

[Busa204]

I never used the black wire....Also I used the original turn signal connectors from the old turn signals & attached them to the clear alterantive ones. That way you are able to connect using the factory plug..

[Speednut]

Busa 204, wish i thought of that. But i guess it wouldnt have mattered since i had already cut off the bikes connectors a while bacl to do something different. It worked out at night, but during the day the homemade signals were useless. I appreciate everyones help. I went out there and took a chance cause I figured the black wires wouldnt get used, and sure enough i was correct. so everything turned out really good. i would post up some pics, but im sure evryone has seen them before, and the ol girl is dirty anyways. Thanks again for the help!