I got the Bar Riser / Lowering Block installed, Couple little things to watch out for if your going to do this,
#1 My high idle cable was not quite long enough to just place the block under the triple tree, Had to remove ( easy ) also had to remove the Front brake line hose bracket from the lower clamp on the forks.
High idle cable went right back on once block installed, I think the bracket for the brake line will to once the bike is lowered.
My question is this I plan on lowering the front about 1" would it be better to loosen the two bolts on the lower clamp and then loosen the one on the top clamp, ( Tighten / Loosen / Tighten / Loosen until I find the right height or is there a better way.
#1 My high idle cable was not quite long enough to just place the block under the triple tree, Had to remove ( easy ) also had to remove the Front brake line hose bracket from the lower clamp on the forks.
High idle cable went right back on once block installed, I think the bracket for the brake line will to once the bike is lowered.
My question is this I plan on lowering the front about 1" would it be better to loosen the two bolts on the lower clamp and then loosen the one on the top clamp, ( Tighten / Loosen / Tighten / Loosen until I find the right height or is there a better way.