Nos problem

[uktattoobusa]

Hi all
Got a problem have Gen II Busa running boostbysmith Nos harness
Installed to the instructions useing a NOS soleniod , and ecueditor.
What I get is if I do a dry run (no gas on) the fuel is increased when upper mode
Button is pressed , if I turn ignition on without
Starting engine take nos nozzle out , put bike in gear hold throttle
Full and put mode up I get gas. However when engine is running
Get extra fuel but no gas . Any help would be
Gratefully recived .
Cheers

 

[dadofthree]

Have you contacted Greg

 

[uktattoobusa]

Yes still waiting to hear back as he is a busy man thought someone
May have come across this problem

 

[RansomT]

Try this ...

Key On, Engine Off. Transmission in Neutral.

Arm the system and the open the throttle. You should hear the solenoid click. If you turn the gas on, it should spray.

 

[uktattoobusa]

Yes this works but when engine started won't
Spray set in ecueditor 5 gear 7000 rpm tried to 10000
No gas but extra fuel is being add when mode button
Pressed, tried removing nos nozzle and blocking hole
On air box to see if gas working but no joy .
Mmmmm

 

[uktattoobusa]

Hi I still have same problem can anyone tell me
The connection of the par valve to the boost by smith NOS harness
Which is normally plug in and go.what colour wire goes to which as my plugs
Where cut off and soldered by so called mate , and I think this could be
Causing my problem above.
Thanks