greasy_2008
Registered
I was putting the k&n filter in my 08 busa and a new head light. I had to modify the headlight connection to fit my new bulb.
Anyway long story short I thought I had another easy install finished on my bike. I put everything back together and then tried to start her up. I turned the key to the on position, and everything was normal new light came on instrument panel went through its cycle and then I go to turn on the cuttoff switch expecting to hear the wine of the pump. But when I flicked the switch..... nothing
So I started getting worried. Turn the cuttoff switch to the off position and turned key to the off position and then tried again. Nothing again. I pulled in the clutch and hit the ignition switch and it wont even turn over.
So needless to say I am worried and I dont know what I could have done to the pump or any wiring. There is no FI on the instrument panel, and no code that comes up, the damn pump just wont cycle and I hit the ignition switch and it wont even crank cant start the bike. Manual says to check the fuze box, but there is no fuze that protects just the fuel pump, so I am really confuzed.
I've got a suggestion that I hit another button somewhere near the cuttoff switch I dont know what that was about. And I hear something about a rollover sensor or something that could have been tripped. I dont know about that either.
Anyway heres a picture of my bike
Anyway long story short I thought I had another easy install finished on my bike. I put everything back together and then tried to start her up. I turned the key to the on position, and everything was normal new light came on instrument panel went through its cycle and then I go to turn on the cuttoff switch expecting to hear the wine of the pump. But when I flicked the switch..... nothing
So needless to say I am worried and I dont know what I could have done to the pump or any wiring. There is no FI on the instrument panel, and no code that comes up, the damn pump just wont cycle and I hit the ignition switch and it wont even crank cant start the bike. Manual says to check the fuze box, but there is no fuze that protects just the fuel pump, so I am really confuzed.
I've got a suggestion that I hit another button somewhere near the cuttoff switch I dont know what that was about. And I hear something about a rollover sensor or something that could have been tripped. I dont know about that either.
Anyway heres a picture of my bike