need help with wiring going nuts

[bradsbusa]

what wires from bike to connect to this schematic

[bradsbusa]

im about ready to kill somethin

[MC MUSTANG]

Brad those are two relays  - since it doesn't mentiont he tail light, must be for integration...?

What are you trying to do?

PM sent

[Gunnybusa]

Is it a strobing brake light?

[Gunnybusa]

Or is it an intergraded brake / turn signal?

[MC MUSTANG]

Robb, that is what I think, but there is no mention of the tail light as a constant on...

[heavybusa]

LoL, Breathe Brad.

We cant fix the problem until we know which end of the bike you are on.

[Gunnybusa]

(MC MUSTANG @ Jul. 27 2007,08:12) Robb, that is what I think, but there is no mention of the tail light as a constant on...

Yhea Shawn but according to the schematic when the brake light gets power it energizes the relay lights the turn signal which in turn energizes the other relay causing the light to go back off. So to me it looks like intergraded turn signals.

[omslaw]

(Gunnybusa @ Jul. 27 2007,10:18)

(MC MUSTANG @ Jul. 27 2007,08:12) Robb, that is what I think, but there is no mention of the tail light as a constant on...

Yhea Shawn but according to the schematic when the brake light gets power it energizes the relay lights the turn signal which in turn energizes the other relay causing the light to go back off. So to me it looks like intergraded turn signals.

Yeah, that's what it kinda looks like...

[Gunnybusa]

So I guess he wants to know which wires in the rear light assy he needs.

[omslaw]

That's what I'm guessing. Looks like he's trying to make a home-made integrator.

The brake/signal line would be the combined output.

[MC MUSTANG]

Yeah integration seems like what he is going for, haven't seen it done like that...
Wires should be yellow for turns, black, wht/bk and bk/wht


tail light is brown...
Sent him my number... see what happens...

[omslaw]

I'm curious as to why the relays. He would need 4 of them for a setup...by the time one spends that much $$, may as well buy the CA integrator w/ LED...

[Gunnybusa]

(MC MUSTANG @ Jul. 27 2007,08) Yeah integration seems like what he is going for, haven't seen it done like that...
Wires should be yellow for turns, black, wht/bk and bk/wht


tail light is brown...
Sent him my number... see what happens...

Gona take a trip up to VA to help hime out

, you could just send Michelle to help she lives closer

[MC MUSTANG]

(Gunnybusa @ Jul. 27 2007,10:36)

(MC MUSTANG @ Jul. 27 2007,08

) Yeah integration seems like what he is going for, haven't seen it done like that...
Wires should be yellow for turns, black, wht/bk and bk/wht


tail light is brown...
Sent him my number... see what happens...

Gona take a trip up to VA to help hime out  

, you could just send Michelle to help she lives closer  

Naw, I bet we can get him hooked up over the phone, once we figure out what he is trying to do.