need help quick

[foresure84]

how do i adjust my high and low beam light

 

[Powers739]

with a wrench...

 

[foresure84]

where is the adjustment and what kind of wrench

 

[foresure84]

nobody can help with this

 

[Powers739]

I'm not sure about the 08's, but the older stuff was pretty simple just hard to reach...


Highbeam...


Lowbeam...


now we need Jim Beam!

I also believe that turning it CCW raises the beam...

 

[xhilaratorboosa]

There are 4 or 5 of the push-pins under the light, directly above the fender, that can be removed to get the cover off. The one towards the back brake side is the worst one to get at. Then you can get at the adj. screws (metric), one on each side of the light. Sitting on the bike, the left adj.screw is your up & down and the right adj. scew is your side to side. It is also covered in the owners manual. Hope this helps. I just did mine last week.

 

[foresure84]

okay got it thanx

 

[Powers739]

use the search function and you will find what you are looking for.
I don't agree with the above post unless the 08's are backwards to the rest.

I would post a link but I'm surfing via phone at the moment.

 

[Wheelie]

2008 looking up on the left side.


wee