Need help locating flexible oil cooler line

[CTA_Busa_LE]

I'm trying to locate a flexible line for my oil cooler. I recently installed a muzzy system and the more I look at the clearance on the left side between the oil cooler line and the header pipe the more I want to put some distance in it. I read in a thread somewhere that someone recommended a flexible line that would take care of this problem. Anyone know where I can find one?? Any Org sponsors offer any? Anyone know of any downsides to putting a flexible line in?

I'm not wanting to bend the stock line as I have read some doing. Any input would be appreciated.

[PocketRocket]

some NAPA store make them.where I'm at they make any ,size, thread etc..also you might want to use header wrap in it...

[Commuta_Busa]

you have lots of options. The only pain is that the muzzy adapters both have male npt threading.

There are two ways that are the easiest: 1. do the oil cooler block off kit which eleminates the hose all together, or 2. aeroquip and a few other companies have a hose fire sleeve you could put on.

Another approach would be to get some adapters and install a braided AN line and fittings. This requires more work and costs more.

[suzuki4life]

nip the stock line and reuse the fittings....then buy silicone hose and sheathing...napa should have it, If not try a large truck supply store.

[MPH 200]

My line had rubbed through a few weeks back. I replaced it w/ a stock line, but I used header wrap & a radiator clamp to cover the spot where it was rubbing. I have a full Hindle system.