Need a part!!!

yamahor

DEAD MAN WALKING
Donating Member
Registered
I need the wiring harness for the taillight. I got a stocker off E-bay for when I lower the bike, and the people cut the harness before the connector, so I need the harness with the light plugs... Anyone got it?
 
This might work <a href="http://cgi.ebay.com/ebaymotors/SUZUKI-HAYABUSA-PARTIAL-WIRING-HARNESS-1300-99-00_W0QQcmdZViewItemQQcategoryZ35594QQihZ013
QQitemZ230009506131QQrdZ1QQsspagenameZWDVW" target="_blank">http://cgi.ebay.com/ebaymot....meZWDVW</a>
 
This might work <a href="http://cgi.ebay.com/ebaymotors/SUZUKI-HAYABUSA-PARTIAL-WIRING-HARNESS-1300-99-00_W0QQcmdZViewItemQQcategoryZ35594QQihZ013

QQitemZ230009506131QQrdZ1QQsspagenameZWDVW" target="_blank">http://cgi.ebay.com/ebaymot....meZWDVW</a>
Nope... It up TO where I need it unortunately. I need the part the lights themselves attach to. Thanks though.
 
Ben, Derek has the harness you need. For free i think.
 
bump
1zhelp.gif
 
Why not just fab this part...?
+1

When Shibumi and I installed our Clear Alternatives assemblies, we just went to radio shack got the stuff to make a 4 prong plug and made the plug for the signals. Now in the back of our bikes, there are only two plugs instead of three. I have a factory service manual that has the wiring harness in it if you need wire colors.

Don
 
I just hate hard wiring when it's not needed. I'd rather use a factory part if possible, but it's looking like I might have to fab it up...
sad.gif
 
Back
Top