My new turbo gauge!!!

[Freechance]

I just go it installed...thanks guys for pointing me in the right direction for a gauge..all i need now is to know where i can tap into a running light wire???do u also have a color code of the wire???

[RYC1966]

Under the nose there is the euro plug which has 12v+. I think it is on the right side of the nose if you are sitting on the seat...if standing in front of the nose it would be on the left. You have to take some parts off to get at it.

[Freechance]

Do u know what color the wire is?

[Boosted Cycle Perf]

Does the needle shake as bad on those? I hear they're internally dampand.

[frisbee]

I Think theres a brown wire that is for the running lights on euro bikes . its in the front fairing . or just splice into your headlight

[Boosted Cycle Perf]

. or just splice into your headlight

??? yeah, not a good idea.

[Brokenchickenleg]

Which line is best to tap into for the boost gauge?

[Boosted Cycle Perf]

Which line is best to tap into for the boost gauge?

Well since it's a boost only gauge, you can hook it up to the plenum. If it was a boost/vacuum gauge, the. You gotta connect it right to the throttle bodies.

[Quiksilver]

I know this is an old thread but I jjust purchased a aem failsafe boost/vacuum/afr gauge. I'd have to say it's a nice piece. When you say straight to the throttle bodies do you mean between the throttle bodies and the fmu or to the actual brass nipple?