Kickstand Options

[stangman327]

I'm trying to decide which way I should go.

1. Cut factory stand
2. PSR Adjustable Kickstand - ADJUSTABLE KICKSTAND - SUSPENSION - SPORTBIKE
3. BROCKS Billet Adjustable BrockSTAND Black Track Style Suzuki Hayabusa (99-25)
4. BROCKS Billet Adjustable BrockSTAND Black Road Style Suzuki Hayabusa (99-25)
5. T-REX T-Rex Racing 1999 - 2022 Suzuki GSX-R1300 Hayabusa Adjustable Kickstand

Which way would you go or did you go and why and are you satisfied with your choice?

[Dustin02]

I have option #3 for when I need to really lower the bike for racing. Works just fine at 1" lower as well.

[Flows]

Check out Adjustable kickstand | Gen 3 Busa Information for some photos, lengths and weights etc.
I used the PSR because it is longest and tucks out of the way best. I also machined 4mm out of the land to make it kick forward then drilled another hole an inch longer adjusting the pad rotation to match the new kick forward angle. My bike is raised so even the PSR at max length + an inch is only just long enough. I wouldn't want anything that stuck out further sideways when retracted even if it was easier to operate due to the risk of dragging it. HTH

[dcnblues]

Got the T-Rex, but if I was less lazy I would take it to a welder, have him plug the adjustable bolt part, and redrill it 90° so that I could put a nice long bolt in and use it as a heel/toe Peg. The stock kickstand has one and you can use it without looking. None of the aftermarket ones do and I don't know why.

[stangman327]

Forgot about this one

HAYABUSA (2008-2020) Fully Adjustable Kickstand Side Stand

Our BILLET Suzuki HAYABUSA (2008-2020) Fully Adjustable Kickstand Side Stand lowering kickstands use stainless steel hardware and are CNC machined from SOLID ALUMINUM. They are capable of stock length to 3 inches shorter and are the strongest, best looki

soupysperformance.com

[stangman327]

Got the T-Rex, but if I was less lazy I would take it to a welder, have him plug the adjustable bolt part, and redrill it 90° so that I could put a nice long bolt in and use it as a heel/toe Peg. The stock kickstand has one and you can use it without looking. None of the aftermarket ones do and I don't know why.

The soupys has a longer heel peg for those that are interested

[stangman327]

I just found this on AliExpress: $53.38 | For Suzuki GSX1300R Hayabusa GSX 1300R 1999-2023 2024 Parking Rack Support Foot Adjustable Kickstand Sidestand Holder Motorcycle

https://a.aliexpress.com/_mObWiyj

[mabupa]

I'm trying to decide which way I should go.

1. Cut factory stand
2. PSR Adjustable Kickstand - ADJUSTABLE KICKSTAND - SUSPENSION - SPORTBIKE
3. BROCKS Billet Adjustable BrockSTAND Black Track Style Suzuki Hayabusa (99-25)
4. BROCKS Billet Adjustable BrockSTAND Black Road Style Suzuki Hayabusa (99-25)
5. T-REX T-Rex Racing 1999 - 2022 Suzuki GSX-R1300 Hayabusa Adjustable Kickstand

Which way would you go or did you go and why and are you satisfied with your choice?

I have the PSR. Had on the gen2 and gen3. Never owned one of the other options you listed so have nothing but oem to compare the PSR to but, have no complaints

[stangman327]

I have the PSR. Had on the gen2 and gen3. Never owned one of the other options you listed so have nothing but oem to compare the PSR to but, have no complaints

this is my setup now

I just found this on AliExpress: $37.59 | Adjustable Kickstand Side Stand Compatible For Suzuki Hayabusa GSXR1300 1999-2024 GSXR1000 GSX R1000 2007 2008 Foot side Stand

https://a.aliexpress.com/_mMy9CrD

Seems to be a knockoff PSR. I used a PSR on my gen 2 and loved it.

[Nevr enuf]

Don’t you find it hard to put the kickstand down because it’s missing that little spike that the OEM has?

[LC4CARL]

Aluminum is intresting. Another place to drop an ounce or two.

[mabupa]

Don’t you find it hard to put the kickstand down because it’s missing that little spike that the OEM has?

All a matter of getting used to it.

[mabupa]

Aluminum is intresting. Another place to drop an ounce or two.

A nice weight saving.

[Blkoutbusa]

0 complaints from my PSR (on my gen 2)

[stangman327]

Don’t you find it hard to put the kickstand down because it’s missing that little spike that the OEM has?

You get use to it

[stangman327]

Make sure you use a little blue loctite on the adjustment screw or it may fall out and your kickstand will separate do t ask me how I know.
Oh and I also added a lock washer

[phalse]

I just found this on AliExpress: $53.38 | For Suzuki GSX1300R Hayabusa GSX 1300R 1999-2023 2024 Parking Rack Support Foot Adjustable Kickstand Sidestand Holder Motorcycle

https://a.aliexpress.com/_mObWiyj

i cannot tell you what a bad idea this is. so, the kickstand, which holds your bike up from falling over at any given time is a potential single point of big time failure, and you wanna maybe buy some utterly cheap piece of poop from china?

this is a horrendous idea and should not be considered, at all. everyone knows poop from china is cheap for a reason. there are times when its ok to take the risk and maybe you get something halfway decent from china (not like they cant make SOME things good) but the kickstand of your bike sure as hell isnt a candidate.

cant go wrong with soupys =D

[Nevr enuf]

Right, but Soupys’ kickstands are $200 vs $40 for the Chinese brands.

I’m sure Soupys offers superior quality but some aren’t willing to pay the price.

[pcs]

Make sure you use a little blue loctite on the adjustment screw or it may fall out and your kickstand will separate do t ask me how I know.
Oh and I also added a lock washer

View attachment 1697237


View attachment 1697238

View attachment 1697239

so do i

[mabupa]

Make sure you use a little blue loctite on the adjustment screw or it may fall out and your kickstand will separate do t ask me how I know.
Oh and I also added a lock washer

View attachment 1697237


View attachment 1697238

View attachment 1697239

Good call! I almost lost mine too!