Intake air temperature

[Bigboy Busa2]

Using water to air plenum. Shouldn't the IAT sensor mount in plenum at the throttle bodies. I was told to strap under. Thanks

 

[202mphbusa]

some plenums don't have a bung, my first didn't

Should be on the cold side not the hot side
DOWNSTREAM of core
FWIW if you are using the OEM sensor closed element it response so slow that u matters little,


Shameless plug
Scott D is adding a hot side so I can log both

 

[Bigboy Busa2]

some plenums don't have a bung, my first didn't

Should be on the cold side not the hot side
DOWNSTREAM of core
FWIW if you are using the OEM sensor closed element it response so slow that u matters little,


Shameless plug
Scott D is adding a hot side so I can log both

I don't mind adding one, in the process of finding a bung. Need to know the thread size. Temp difference between outside of plenum and inside should be enough for trouble of install right? And will have it for a rife when I go standalone. The advantage of seeing pressure from before and after cooler? Thanks