how to repack a motorcycle oring chain with grease

[bandit1201]

thank god i found the org and not a link to that guy boy i would be in trouble

[Acehole]

I think he sounds like Mr. Smith from S&S Logging...ya know James's Dad? Not only that, but his theory's are on par..

Can you just see this guy blowing the "soupy" grease all over his garage with the compressed air trying to clean it?

[BusaWhipped]

I think he sounds like Mr. Smith from S&S Logging...ya know James's Dad? Not only that, but his theory's are on par..

Can you just see this guy blowing the "soupy" grease all over his garage with the compressed air trying to clean it?

I think he's actually Lord Humungous' mechanic.

[Commuta_Busa]

I bet he's still trying to figure out the 710 cap on his car engine.

[BusaWhipped]

I bet he's still trying to figure out the 710 cap on his car engine.

[dadofthree]

I don't know guys; anyone that can pull neg 30 psi of vaccuum might have something

[notright]

I was hearing a touch of Bill Murray giving directions

NO KIDDING! I was expecting him to start talking about his days as a looper (caddy)

[H2447INTX]

did he say vacume injected ?

i dont see how anyone in their right mind would or could see this video and not walk a way fealing stuppeder !

i really dont know what to say .....................................................................................................................................................


i have looked up kinda what he is trying to do,, but i think he has the wrong idea, that chamber will not work ,, i would need to be more like a vacume sealer ,, wher it takes all the air out forching the greas into the chan

you cant just put some greas in a tube and think its doing anthing other than sitting in a pile of greas under - presure ~

[H2447INTX]

some one should tell hime to make it out fo clear lexane tube so we can see it work then post that video!

[rockethead]

some one should tell hime to make it out fo clear lexane tube so we can see it work then post that video!

+1 yeah, I'd watch that one

[scrappy]

Does not sound like Ken, that guy has some wicked accent and can not enunciated a dang thing. Also his grammer is terribad...
Look at the video title in the video.. "how to repack a oring chain" [a] as in a consonant not a vowel. Also

"Here we have the fittens"
"we're gonna let dat go like dat"
"den whatchyou wanna do is"
"i hang da chain up and i blow da chain off"
"and dat's it, you just repacked your oring chain"
"and ikesay it works"

[scrappy]

:

I think he sounds like Mr. Smith from S&S Logging...ya know James's Dad? Not only that, but his theory's are on par..

Can you just see this guy blowing the "soupy" grease all over his garage with the compressed air trying to clean it?

I was thinking the exact same thing.. also he uses a lot of shop rags.... probably because he has to wipe down the entire garage when he is finished... "dangit, got grease on the ceiling again"

[Spkrdctr]

I also thought it was a joke. The entire principle of vacuum and pressure differentials is lost on him........