Greenbean
Registered
I got a set of black mirror block off plates, Spoke to the guys at OPP Racing and after looking at part numbers from a Vortex catalog I asked if thier part number covers the gammot of GSXR models I am going to gamble and buy a set and hopefully they will work on my gen2.
I was wrong, Maybe, it seems after removing the mirrors the actual threaded holes to secure the mirrors come through the plastic maybe and 1/8th-1/4 of an inch or so. Thus the block off plates don't sit flush and wouldn't secure anything.
So am I missing something, Do the ones from Vortex have a notch opened up in the back side to factor this in or am I going to have to remove the threads and find a way to secure them from the back side also.
Thanks in advance guys.
I was wrong, Maybe, it seems after removing the mirrors the actual threaded holes to secure the mirrors come through the plastic maybe and 1/8th-1/4 of an inch or so. Thus the block off plates don't sit flush and wouldn't secure anything.
So am I missing something, Do the ones from Vortex have a notch opened up in the back side to factor this in or am I going to have to remove the threads and find a way to secure them from the back side also.
Thanks in advance guys.
Last edited: