Guy with Yosh cams.

[GMbusa]

To the guys that have installed Yosh cams in their bikes i have a question for you about the timing marks.

Did you have to install the sprockets offset one tooth on the exhaust sprocket? I have the 15 pin count, but something doesn't seem right.

540-223-3785 Paul

Gimmie a call.

 

[silverfreak]

The yosh cams have adjustable sprockets on them.your cams should have -slash marks on the cam itself.those marks should always be lined up with the cylinder head cam cover gasket seat.intake marker should line up with the side of the fuel injection.and the ex-cam mark should line up on the header side.these can be a total bastid to get just right if youre engine is still in the bike.also the cam gears should have numbers on them.#1 on the exhaust cam should be even with the cylinder head facing the header side.the #2 should be straight up and the #3 on the intake cam should be straight up.then there should be the 15 link pins distance between #2 AND#3.a good setting for overall performance for the yosh cams is 105/105 degrees.Hope this helps.