I'm putting fork springs in and i have a few ?
1. Do the Forks need to come off the bike?
2. What weight oil do i need?
3. How much oil do i need?
4. Any tips or tricks?
1. Yes
2. I used Mobil Synthetic automatic trans fluid it’s supposed to be about 8 or 9 weight. Use at you own risk.
3. About a quart and a half. Don't know for sure. Do you want a copy of the shop manual on pdf?
4. You don't really need the special tools from the stealership but I had to build something to hold the spring back, it's not like my dirt bike with a lot of room and a soft spring. I used a plate and pipe with bolts through it and held it by hand but it sucked. Next time I’m going to build a bottom plate and strap that sucker so I don’t have to wake the neighbors cursing.
MAKE SURE EVERYTHING IS CLEAN! One speck of dirt can be a BIG PROBLEM!
And don’t drop them the aluminum dents real easy.
When you’re done look up jinkster’s suspension setup guide and you’ll love the change.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.