fitting Brembo Calipers on non abs busa

[big gee]

Has anyone fitted Brembo Calipers to a Non ABS model if so any problems

[Bumblebee]

My bike has Brembo calipers, no ABS and works great. A caliper is a caliper

[white.Busa]

Has anyone fitted Brembo Calipers to a Non ABS model if so any problems

needs spacers to fit and new brake lines
here is my own
http://rover.ebay.com/rover/1/711-5...0001&campid=5337943218&icep_item=401342000139

[big gee]

Did your forks have locating dowels for the tokiko calipers

[bigron]

No issues getting Brembos. Like others have said, you need spacers. Works like a charm.

[GIXERHP]

needs spacers to fit and new brake lines
here is my own
BREMBO 108 mm M4 Radial Cast Forged Calipers Kit 220A39710 with Brake Pads | eBay
View attachment 1594176View attachment 1594177

What size rotors are those,, Stock ???

[white.Busa]

What size rotors are those,, Stock ???

Yes 310 x 5mm
this is the code to order them DF351CW-2V1

[fallenarch]

My Brembos bolted right up no problems. I have an 09.

[Boosted Cycle Perf]

Did you guy notice any increase in braking? I almost jumped on a set last night but really couldn’t justify the cost if there’s no gain.

[white.Busa]

Did you guy notice any increase in braking? I almost jumped on a set last night but really couldn’t justify the cost if there’s no gain.

I have a huge difference but I can not say with certainty the reason because I install the same time
the brembo M4 calipers , galfer wave rotors, venhill brake lines, and BREMBO RCS19 RCS 19 BRAKE MASTER CYLINDER.

[Mike Chambers]

Has anyone fitted Brembo Calipers to a Non ABS model if so any problems

Mate here did it on his 09 model , no fitting issues and no spacers needed, his only issue if using brembo master cylinder, u will need to extend bars as cylinder bracket is wider than stock one

[GIXERHP]

My Brembos bolted right up no problems. I have an 09.

The Hp Calipers need the spacers,, Unlike the Cast Brembo's that you have

[Marc]

I noticed 3 big brake power upgrades in my 08:

1. HEL brake lines.
2. EBC HH pads.
3. Arashi rotors

Did one mod after other, major difference is the brake line, than rotors, than pads.

I'm still running with factory master cylinder.

[macca26567]

Does anyone have a link for the spacers that people have mentioned?.
Thanks in advance.
Mike.

[mabupa]

Does anyone have a link for the spacers that people have mentioned?.
Thanks in advance.
Mike.

Are you installing aftermarket brembo calipers or used brembos that came off a newer hayabusa?