Drag racing seat set up ????

[Redliner-Chicago]

Can anyone recommend a company that makes a nice drag racing seat set up in which I won't have to alter my tail section ?
I'm looking for a simple bolt on and go type set up in which I can switch back and forth from my stock seat without too much trouble.
Thanks ???

 

[Ludicrous Speed]

It all depends on what you want.....

I used to use a stock seat pan, that was recovered and had a very thin (1/8" to 3/16") of foam, and it worked great for me.

Other people like the seat pans. Either fiberglass, carbon fiber, or aluminum.

I am going to try an aluminum one, if I can find one, this time around

 

[Jacobs]

Catalyst Drag Seat Suzuki GSX1300R Hayabusa - Schnitz Racing

 

[BlueHaya]

I have the catalyst on my 05. I drilled out the mouting brackets and use the pins instead of bolts and can pull it off with out tools.

 

[GoldenChild]

Gatlin seat, it's metal can be covered and won't ever crack...

 

[Jacobs]

Gatlin seat, it's metal can be covered and won't ever crack...

Now that's fancy right there

 

[Ludicrous Speed]

The Gatlin is what I am looking at using this year. Gotta see how it works with my tank that I cut down. I had a carbon fiber pan one time, but it cracked and did not last long

 

[Lucid]

As low as possible.

 

[gixer les]

I have the catalyst on my 05. I drilled out the mouting brackets and use the pins instead of bolts and can pull it off with out tools.

Good idea, any pics of which pins you use please? cheers.