how to repair carbon fiber?
i just found two cracks on my fender at the back,each side not sure how it happened but anyway...........
heard something about two part epoxy for the repair but not 100% sure..........any input?
Dont know how to repair but if your bike is lowered in the front you might be bottoming out and that may have caused the cracks... I would go with the Epoxy route to fix it unless someone has a better idea. I'd take the fender off and apply the epoxy from the inside so that it couldnt be seen. Hope this helps!
Yeah all depends on how the crack is. Epoxy would work from underneth but I would suggest using a small strip of fiber glass mat and some resin underneth that way it will be nice and strong
(Devil Dog @ Oct. 07 2006,16:02) I do. You need the 2 part resin and catalyist.....plus the fiber material if its bad enough. A mixing cup, and a heat lamp......
Its not hard but you at least need to see it done once before you do it......
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.