DIY O2 Sensor Bypass

[SpeedFiend]

Does anyone know the resistor needed for an O2 bypass? I tried searching and came up with 12 or 330 Ohms. I don't feel like paying or waiting for the ready-made ones.

 

[09GraySilverBusa]

Go to Radio Shack or other local electronics store and pick up a 1 watt 330ohm resistor. Clip your stock O2 sensor off the connector harness and solder the resistor between the 2 white wires.

 

[SpeedFiend]

Thanks. That's exactly what I was planning to do, just wasn't sure of the resistance.

 

[dadofthree]

Good luck with. Aftermarket exhaust ?

 

[SpeedFiend]

Yep Brock's