Kat600
Registered
So after searching this forum and every online parts microfiche I can find for this part, I went to the dealer and they can't find it either. He even walked me into their parts room and we went through all the clips they had in stock and nothing was close. All the microfiches I clicked on, I searched every single diagram and couldn't come across it. Unless I missed something here in the bunch of threads I read, this hasn't been talked about here either.
If anyone can get me a part number for this I would appreciate it. It is a fairing clip/rivet/push pin that goes where the #9 is pointing below. The #9 is for the "cowling" piece itself, not the clip of course.
I tried the 2 other very common clips/pins from the busa and they are either too small or too long... The one I need is below. The head is 18mm and the pin length is 16mm. It has little notches at the top of the pin that need to be lined up in the head of the pin.
Please, please, please someone find a part # for me! I don't care if it's Honda, Yamaha, Suzuki, etc... as long as it fits. I only need 2 and don't want to have a huge pin kit ordered. I also live in Canada, so some of the other bike parts places online charge too much for shipping for a couple of clips. OEM is appreciated so I can buy local, but I'm open to any suggestions...
If anyone can get me a part number for this I would appreciate it. It is a fairing clip/rivet/push pin that goes where the #9 is pointing below. The #9 is for the "cowling" piece itself, not the clip of course.
I tried the 2 other very common clips/pins from the busa and they are either too small or too long... The one I need is below. The head is 18mm and the pin length is 16mm. It has little notches at the top of the pin that need to be lined up in the head of the pin.
Please, please, please someone find a part # for me! I don't care if it's Honda, Yamaha, Suzuki, etc... as long as it fits. I only need 2 and don't want to have a huge pin kit ordered. I also live in Canada, so some of the other bike parts places online charge too much for shipping for a couple of clips. OEM is appreciated so I can buy local, but I'm open to any suggestions...