Cutting out/dying

[Phatroy]

Noah,
If I'm not missing what they said all of the filters are inside
the fuel pump. There are two mesh type and one paper type filter. I looked at mine at the shop last night. They were way clogged. The paper filter was almost completely gone. It was clogging up the third.

[havoc]

i had the same problem, low and behold the IDLE had slipeped down to 900rpm, had it adjusted to 1200 . no problem any more

[ISALSA]

Noah,
If I'm not missing what they said all of the filters are inside
the fuel pump. There are two mesh type and one paper type filter. I looked at mine at the shop last night. They were way clogged. The paper filter was almost completely gone. It was clogging up the third.

How many miles did you have on your bike?

I just finished one of the bikes and starting on my girlfriend's

[Phatroy]

Noah - I have 50, 000 on my bike. It's a 2000. Dealer
stated they are going to put on my list of maintance items
now to be checked during normal maintance visits.

[ISALSA]

Noah - I have 50, 000 on my bike.  It's a 2000.  Dealer
stated they are going to put on my list of maintance items
now to be checked during normal maintance visits.

I noticed when my bike is idleing on its side stand it would die. But if I notice it is going to die I can move the bike of the side stand to the normal riding position, then the idle will come back to normal

[Phatroy]

Sounds hinky! I'm not sure if thats filters. You got me on that one.

[Curt]

*drool* busachick... wish i knew a chick with a bike that knew technical stuff.. *drool*

Well hey,
You know me sort of!! LOL
Busachick

ontario eh.. that's only a few thousand kms from me