Crank Case Breather Gen3 mod

[Robert 0046]

Has any one done this mod on a Gen3? If you have done it let us know how you avoid the smell coming out of the center of your bike, how did you made it? If you route the house to what part of the bike or if you just put a little filter on top? Lets see some pictures

[SS4Luck]

I have the plate with a single outlet. I ran just a filter for a long time and the smell really isn’t noticeable unless you’re sitting at idle and even then it’s faint. I currently have the hose ram to the airbox because I broke a filter (like I did it it didn’t break on the bike). Someday I’ll get a vent to atmosphere catch can and bolt it to the cross brace of my swingarm and do it the “right” way.

[SS4Luck]

https://store.schnitzracing.com/ape-low-profile-crankcase-breather-cover-plate-suzuki-hayabusa-99-20/?sku=BC1300-2&gclid=CjwKCAjwyqWkBhBMEiwAp2yUFsAS6F8MMAQX-P-4RObbQKwRI1QMZEqZ1HygaL81kGBI8Ef644lg4hoCuMkQAvD_BwE

This is what I have. I had a UNI filter on it for 1000+ miles with zero issues. I cut the filter open just to see once I broke the neck of it and it wasn’t even slightly tinted in color.