Connector information wanted

[bigone5500]

I have a '23 Hayabusa and want to know if anyone has any information on the plug/socket that is used in the dealer mode switch. I know I can buy one but for $95 that's a no-go. I can build one myself if I knew the plug/socket that is used. I currently use a very small piece of wire but don't like doing that as damage is possible.

Any info is appreciated.

 

[bigone5500]

Ok. After posting this, a link appeared below and I followed it to learn that the connector below my pillion seat is an OBDII connector. It's called a Euro5 6-pin socket.

Now after a lot of searching, I don't see where I can purchase just the socket with crimp pins. All I can find are the connectors with the regular OBDII plug on the other end, which may be my only option at this point. I probably could simply cut the unwanted plug off and wire in my switch.

 

[GIXERHP]

Try here,

Connector Kits, Terminals, Wiring, Tools | Corsa Technic

Motorsport electrical products: OEM and hard to find terminals and connector kits, wiring, harness supplies, tooling, and sensors for modern and vintage motorcycle, automotive applications. Easy online shopping, low cost shipping options, to expedited around the world. We accept Paypal and...

www.corsa-technic.com

 

[–0——0–]

Use MWT connector in your google search. This may help

-TS

 

[smithabusa]

Thats the shell, I sell the dealer mode switch with toggle for $45

If you haven't worked with these before, they are kind of a PITA to work with.

https://www.mouser.com/ProductDetail/JST-Automotive/MWTPB-06-1A-R?qs=u16ybLDytRbIt3ibgx3Org%3D%3D&countrycode=US&currencycode=USD

Gen3 Hayabusa Dealer Mode Switch

Allows you to pull FI codes as well as set the service interval on the Gen3 Hayabusa.

boostbysmith.com