can anybody help

[redjamesbusa]

only thing ive done to it is put on some yoshi slip ons
and most of the time when i pull up to a light or stop it wants to stall out or cuts off
what could this be

[greeneinc]

Is there only a problem at idle or anywhere else when accelerating?

[greyrocket]

check the idle mine did that awhile ago. should be about 1100-1300 rpm.

[redjamesbusa]

no where eles only when its been running and come to a stop
like u know when u come to a stop and u like to twist the thottle a little to get that sound after that it wants to shut of when it goes back to idle



<!--EDIT|redjamesbusa
Reason for Edit: None given...|1118931342 -->

[busa9]

Dont forget to check the kickstand kill switch!!!! Someone posted a problem like this a week or so ago seems the kickstand was dropping off the switch enough to cause a problem!! I do know if the idle is set to low it wants to kill itself for some strange reason!!!!

[mzrsq]

Definitely sounds like the idle is too low. The Busa DOES NOT like a low idle, anything below 1100 at the minimum and just the twitch of the throttle at an idle and she will die. Get it above 1100 and you can snap the throttle all you want and she won't cut out. At least, this has been the case with mine.

[BA BUSA]

It sounds like your idle is too low

[redjamesbusa]

ty to all

[wizeguy]

Ditto on the ilde being to low. I bet it cuts off if you "blip" the throttle and pull the clutch in. I had the same pipes on my first busa and I had to bump revs up a few to fix the problem.

[Gerald]

**Idle adjustment** gets my vote too.....

[stkr00]

Idle adjustment +1

[shenoyp]

I had the same prob when i put on my slip on's... the idlewent kaput!! But nothing to worry...set your idle right...and if you have a PC3 on... re-set your TPS.

....everything will be back to normal!

[redjamesbusa]

cool that seemed to work thank you everybody