boosta1395
Registered
I have a stock swing arm streched with extentions and have noticed there is plenty of room now between the tire and swingarm for a 2.5 jug of nitrous.Does anyone make a bolt on bracket?
I will see him at Track this weekend or see my other fab guy today when he stops in and might can have some mid next week.I would like.How would you like to make contact.I have Pay Pal
can you fabricate some kind of plate for the MPS bracket above that would attach to the bracket and the bottle could sit on.Im worried the bottle will work itself loose while rideing,i have the lines zip tied hoping that would help prevent it dropping too far if it did come loose but would feel better if i knew it wouldnt fall out at all.you will need to weld it on to make work with a stock arm.I had some awhile back that you drill,tap and locktite them on and had antidrop bracket on it.I can have some made if you like..
I CAN BUT NEED A FEW MEASUREMENTS FROM YOU AND YOUR BRACKET OR I CAN USE NEW BRACKET AND POWDERCOAT AND SHIP TO YOU IN EXCHANGE PLUS COST OF FAB.can you fabricate some kind of plate for the MPS bracket above that would attach to the bracket and the bottle could sit on.Im worried the bottle will work itself loose while rideing,i have the lines zip tied hoping that would help prevent it dropping too far if it did come loose but would feel better if i knew it wouldnt fall out at all.you will need to weld it on to make work with a stock arm.I had some awhile back that you drill,tap and locktite them on and had antidrop bracket on it.I can have some made if you like..
I'm still interested in these...BRACKETS COMPLETE READY TO INSTALL WILL BE $75 TYD IN BLACK OR SILVER POWDERCOATED,$60 RAW NOT COATED 6 IN STOCK READY TO SHIP.
i HAVEN'T HEARD FROM GUY THAT WANTED THEM BUILT SO IF YOU WANT ONE LMK.
Quote: (narider @ Jun. 19 2008, 11:20 AM)
> Pictures of completed product? Will it fit a 1K arm?
> Todd
Soon as I get more back from coater i will measure up on a 1k arm..Pictures of completed product? Will it fit a 1K arm?
Todd
Thanks.. will keep my eye on this thread.Soon as I get more back from coater i will measure up on a 1k arm..Pictures of completed product? Will it fit a 1K arm?
Todd