Hey guys, havent posted here in a while, but need some advice. I currently have about a 6 inch extension and want to remove it and put the stock blocks back in. It is a roaring toyz extension if that helps.
I am pretty mechanically inclined, but not having the stock parts or knowing how they were originally, I am a little weary of doing this myself. Not that I doubt my ability at all, but again, dont know what the stock configuration looked like.
I have seen many blown up diagrams and really dont think there is much involved, but need some reassurance because I would rather do it myself than pay the dealership 300 bucks to do it.
Ive ordered the stock adjustment blocks, bolts, etc. and a new chain and sprocket.
Anything I should be concerned about or need to know?
I am pretty mechanically inclined, but not having the stock parts or knowing how they were originally, I am a little weary of doing this myself. Not that I doubt my ability at all, but again, dont know what the stock configuration looked like.
I have seen many blown up diagrams and really dont think there is much involved, but need some reassurance because I would rather do it myself than pay the dealership 300 bucks to do it.
Ive ordered the stock adjustment blocks, bolts, etc. and a new chain and sprocket.
Anything I should be concerned about or need to know?
