BLACK10
Registered
- Joined
- May 29, 2010
- Messages
- 131
- Reaction score
- 0
09 HAYABUSA- NEW OWNER, NEW LOOK
Hi All,
I recently sold my 09 to a great friend and customer (Jude) so that I could do more mods to my Camaro SS. I couldn't have found a better person to sell it to. Right away there were plans to make this bike special and of course he asked me to do the build for him. He decided to go with Roaring Toyz for all the 330 kit and Arnott Inc for the air ride setup. I've used Arnott on a pro street build before and they have great products and support and of course Brad with Roaring Toyz was very helpful as well.
All exposed wiring had heat shrink applied to it and everything was done is show fashion.
sorry for the cell phone pics, BETTER pics and a few vids to follow......it needs a wash and buff and new matte black kanji decals to be installed
Here is the list of parts that went on the Bike:
Bike already had powder coated peg mounts, billet levers and pegs, tinted wind screen, lowered front and throttle lock.
Roaring Toyz:
330 O.S.D. kit
Black coated rear sprocket size 45T
Avon Venom 330MM Rear Tire
Heavy Duty X-Ring Chain
Extended Stainless Steel Rear Brake Line
Shift Shaft Extension Piece
Roaring Toyz engraved rear axle adjuster plates
Rear axle
Rear wheel spacers
New swing arm, bearings
Cut Stainless Steel Brake Rotor and Trick Billet Machined Custom Rear Brake Caliper Hanger
Performance Machine Custom Forged Aluminum Billet 17x3.5 Front & 17x12 Rear Wheels
4-2-1 exhaust
Arnott Inc.:
Air suspension
16-Position QA1® Shock Absorber
Goodyear® Air Spring Sleeves
Black Anodized Finish
Chrome Compressor W/ Vent Solenoid
7 Different Installation Height Settings
Adjustable Clevis Design
6061-T6 Billet Aluminum Construction
Micro-Toggle Inflation Switch
And for some show, Red Led lighting with 10 lights.
enjoy the pics!
Hi All,
I recently sold my 09 to a great friend and customer (Jude) so that I could do more mods to my Camaro SS. I couldn't have found a better person to sell it to. Right away there were plans to make this bike special and of course he asked me to do the build for him. He decided to go with Roaring Toyz for all the 330 kit and Arnott Inc for the air ride setup. I've used Arnott on a pro street build before and they have great products and support and of course Brad with Roaring Toyz was very helpful as well.
All exposed wiring had heat shrink applied to it and everything was done is show fashion.
sorry for the cell phone pics, BETTER pics and a few vids to follow......it needs a wash and buff and new matte black kanji decals to be installedHere is the list of parts that went on the Bike:
Bike already had powder coated peg mounts, billet levers and pegs, tinted wind screen, lowered front and throttle lock.
Roaring Toyz:
330 O.S.D. kit
Black coated rear sprocket size 45T
Avon Venom 330MM Rear Tire
Heavy Duty X-Ring Chain
Extended Stainless Steel Rear Brake Line
Shift Shaft Extension Piece
Roaring Toyz engraved rear axle adjuster plates
Rear axle
Rear wheel spacers
New swing arm, bearings
Cut Stainless Steel Brake Rotor and Trick Billet Machined Custom Rear Brake Caliper Hanger
Performance Machine Custom Forged Aluminum Billet 17x3.5 Front & 17x12 Rear Wheels
4-2-1 exhaust
Arnott Inc.:
Air suspension
16-Position QA1® Shock Absorber
Goodyear® Air Spring Sleeves
Black Anodized Finish
Chrome Compressor W/ Vent Solenoid
7 Different Installation Height Settings
Adjustable Clevis Design
6061-T6 Billet Aluminum Construction
Micro-Toggle Inflation Switch
And for some show, Red Led lighting with 10 lights.
enjoy the pics!
