trying to change sprockets and chain but this damn nut is killing me. anybody have any tips to get it off. i wrapped a steel bar with a towel and placed it thru the swing arm so the wheel wouldnt turn while i turned on the front sprocket nut. im using a 1/2in drive socket with a torque bar and ive been pulling on that mug so hard it feels like im bout to break something, but that nut wont budge. from looking at it i dont think it has backwards threads but i did try to turn it that way just to see if it would help break it loose, but to no avail. i tried using an impact gun also but it's too weak. i think i put too much thread locker on it the last time i had it off. the only thing i can think of now is to soak it in wd40, let it set a while and go at it again. if anyone has a better technique, let me know.