Undertail that keeps stock tailight?

[suzuki4life]

and as for the motorhjunk comment


judge for yourself (not my bike)

[Big Red]

Texas Faring has or had a undertail that retains the OEM tail light

[busa9218]

Why not just cut the shovel off... it's cheap, that's what I did.

meaning u juz got ur mudflap cutoff n dats it???

[BigBSBusa]

meaning u juz got ur mudflap cutoff n dats it???

Yep, that's it.

[busa9218]

wokay dude, gez i'll juz nid a pair of gud penknife

[Powers739]

meaning u juz got ur mudflap cutoff n dats it???

Integrated Tail light from Clear Alternatives and cut the flap off, dats it...

[busa9218]

FinaLLy chopped-oFF my mudfLap wif a v.good paiR of PenkniFe....it wasnt as hard as i

1st tot it wud be nid to do some touching up tho. . .heres a pic oF it before

and after, wiF my integrated signaLs...............

[Schism]

Texas Faring has or had a undertail that retains the OEM tail light

steer clear of texas fairing! those bastids will rob you blind. check out there bbb reports against them. it's a laundry list!

[01LANDROCKET]

Has anyone seen the undertail that is two clear lenses and has the kanji in them. It is a badass undertail and the guy i got mine from I think it was southern creations on ebay probably 4 years ago is not there anymore. Anyone????

[shahrul_azmil3]

FinaLLy chopped-oFF my mudfLap wif a v.good paiR of PenkniFe....it wasnt as hard as i

1st tot it wud be nid to do some touching up tho. . .heres a pic oF it before

and after, wiF my integrated signaLs...............

how about you adding the relocator too ....

no point imo if you decide to stick to the singapore licence plate .... it's as big as the plastic thingy .....

BikePics.com

[busa9218]

how about you adding the relocator too ....

no point imo if you decide to stick to the singapore licence plate .... it's as big as the plastic thingy .....

BikePics.com

seriousLy u did dat to ur busa??? here in SG????

[godzilla]

this one fits stock taillight: DR305 UNDERTRAY SUZUKI GSXR GSX R 1300 HAYABUSA bei eBay.de: Motorcycle Parts (endet 26.11.08 08:37:55 MEZ)

bought one of these, but had to modify it heavyly, cause my bike is 6 inch over and 2 inch lowered. there wasn´t enough space for my back tyre - and i didn´t want to miss that ;-).
i also removed the upper part of the stock taillight. so i cutted the complete tailsection of the undertray in several pieces, rebuild it to fit the taillight-mod and to get enough clearance for the wheel.
the original undertail is removed. i took some stainless steel an welded an batteryhousing which is mounted to the frame. the result is very decent. the busa-tail is closed again, i was able to keep the stock light and get enogh wheel-clearance. it´s been a lot of work, but to me it was absolutly worth it.

[busa9218]

this one fits stock taillight: DR305 UNDERTRAY SUZUKI GSXR GSX R 1300 HAYABUSA bei eBay.de: Motorcycle Parts (endet 26.11.08 08:37:55 MEZ)

bought one of these, but had to modify it heavyly, cause my bike is 6 inch over and 2 inch lowered. there wasn´t enough space for my back tyre - and i didn´t want to miss that ;-).
i also removed the upper part of the stock taillight. so i cutted the complete tailsection of the undertray in several pieces, rebuild it to fit the taillight-mod and to get enough clearance for the wheel.
the original undertail is removed. i took some stainless steel an welded an batteryhousing which is mounted to the frame. the result is very decent. the busa-tail is closed again, i was able to keep the stock light and get enogh wheel-clearance. it´s been a lot of work, but to me it was absolutly worth it.

nice n im using the same set of wheeLs too.........

[shahrul_azmil3]

seriousLy u did dat to ur busa??? here in SG????

yup .... why not to ???

u'll still get the same ticket as me ....

no mud guard .... fines .....

of coz now my plate is in the original size ....


saw ur bike at ah lai .....

boy .... u sure over cut your flaps .....

[busaboyn2o]

Resurrecting an old thread. Has anyone made an undertail the will work with the stock tail light? (I'm using a tiger tail and am nervous about the electronics getting wet.)