TW-400 alarm install

[rxhealer]

Hey guys, I'm new to the forum & I need some help with the wiring of the TW-400 alarm. I don't have the wiring diargam for the Busa & I need to know whats color for the ignition switch, directional signals, ignition module, & the coil.

[yaesu]

I have just started to install mine also.
good luck.
Do a search on here.
There is some post about this.

[MC MUSTANG]

Brown is for the ignition module (if you want), yellow are for the turn signals. The rest of the wires (besides the battery wires) hace QDs on them for the siren/speaker and antenna.... I will post a couple of links...

[MC MUSTANG]

Here's a link that I posted several links in...hope this helps..




<!--EDIT|MC MUSTANG
Reason for Edit: None given...|1137037372 -->

[rxhealer]

So, I take it that you don't have to use the ignition switch, coil or ignition module wires and the unit will still work fine.

[MC MUSTANG]

So, I take it that you don't have to use the ignition switch, coil or ignition module wires and the unit will still work fine.

To be honest, I didn't even know that the TW-400 had the remote start option....so yes, it will work fine, jut no engine disable and no remote start.