Rear grab bar install

[Cpt_Caveman]

Hey guys, just looking for a quick answer on this one. What size are the bolts for the rear grab bar? I know about the hump mod and everything else to take care of with it, but I am just missing the bolts to do the install. Hoping to go pick them up at the local hardware store, but I don’t know what size I need. Thanks
Gen I if it matters

[Kiwi Rider]

The bolts are 8mm x 1.25pitch and 30mm in length
Here's a tip: if you need parts info or even if you need fastener sizings or bearing or seal sizes, check on megazip . . . . .
https://www.megazip.net/zapchasti-dlya-motocyklov/suzuki/gsx1300-15971/gsx1300-31522/gsx1300rx-e2-x-72370


01550-08303-000
Bolt (8x30);
4 pc of this part is used in this component. Price is shown for 1 pc.

[jeffgordons24]

Whay year is your bike? Not sure if gen 1 / gen 2 had diff bolts. I have a gen 1 I can check mine.

[jeffgordons24]

The bolts are 8mm x 1.25pitch and 35mm in length
Here's a tip: if you need parts info or even if you need fastener sizings or bearing or seal sizes, check on megazip . . . . .
https://www.megazip.net/zapchasti-d...300-15971/gsx1300-31522/gsx1300rx-e2-x-723705

LOL Kiwi beat me to it!

[Kiwi Rider]

LOL Kiwi beat me to it!

Lol, Jeff, ya gotta be quick!

[Cpt_Caveman]

Thank you guys!