Quick question

DocDrop · Aug 24, 2009

Does anybody know the size and length of the triple tree bolts. I have some 1 inch risers that i want to put on my gen 1. Thanks peeps

BusaWhipped · Aug 24, 2009

I have the stock ones laying on my workbench. If nobody posts up before I get home, I'll measure them for you.

VFRcanada · Aug 24, 2009

10x100mm

BusaBlue · Aug 24, 2009

I installed a Soupys 1" riser on my K8 and the ones that came with the kit were 10x90. More than long enough - I ground them down a little bit.

VFRcanada · Aug 24, 2009

VFRcanada said:
10x100mm

Oops, that might be the one for my Genmar risers.

VFRcanada · Aug 24, 2009

Stock are 10x60mm. Sorry for the confusion.

DocDrop · Aug 24, 2009

so 10x60mm is stock right.

VFRcanada · Aug 24, 2009

BlueHaya · Aug 24, 2009

DocDrop said:
so 10x60mm is stock right.

+2

dadofthree · Aug 24, 2009

Be careful when going to lock. Front brake might operate :beerchug:

Good luck with it :thumbsup:

DocDrop · Aug 25, 2009

dadofthree said:
Be careful when going to lock. Front brake might operate Good luck with it

That would be fun, thanks for all the feed back :thumbsup: