Performance cams for 1st. generation (2007) Hayabusa

Jimmy c 6093

Registered
I emailed Yoshimura and was told that they "do not" produce Stage 1 cams for the 1st. generation Hayabusa anymore. I went to the Brock's site and see nothing for 1st. generation. Called Web cams in Cali and says they're not open, but I did call during their advertised business hours.
Can someone tell me who carries performance cams for the 1st. gen models. Thanks in advance.
 
IMG_0030.jpeg

There is a local camshaft manufacturer hear in beautiful Southern California that can build whatever dimensions you require *
 
Schnitz racing lists then.
Big mod is Gen 1 intake cam on exhaust side
And adjustable sprockets

Adjustable sprockets will be needed for any cam swap

Difference between Gen 1 and Gen 2 cams is cam sensor location

If your cam/s have a pin on both nbd.

Drop in cam lift is the issue
You can only go so far before guide interference
~.385ish from memory. Would want to dig out notes. But head to head. Would measure
 
you just want something a little more aggressive or are you are building some good hp? this will allow you to swap between generations if you are having a hard time finding gen 1. web cams regrinds cams so you send yours and have them made to your specs.
 
you just want something a little more aggressive or are you are building some good hp? this will allow you to swap between generations if you are having a hard time finding gen 1. web cams regrinds cams so you send yours and have them made to your specs.
Thanks much!
 
View attachment 1704264
There is a local camshaft manufacturer hear in beautiful Southern California that can build whatever dimensions you require *
Thank you. Much appreciated.
 
IMG_0304.jpeg

Your camshaft choice will determine many other modifications that this motor may need to upgrade horsepower and torque *
 
Back
Top