Noob question

[1BDAZM]

Ok I have a 2000 Busa I am wanting to put a 50 dry shot on. I have a power commander usb, and numerous other mods. My question is there a way to run a stock tune and at the flip if a switch be on a nitrous tune?
Thanks in advance,
Damien

[DEMMYM]

Curious to hear this myself, But maybe just a 40 shot

[hajii]

I think you can do that with a Power commander multi-function hub. It's got a bar switch that you can use to switch between maps...

Here's the link:
Multi-function Hub

[1BDAZM]

Wow that looks to be exactly what I need.... Then i guess take it to a shop to dyno the two maps and I should be ready to run....

[dadofthree]

I'm not NOS savvy, but you should do a search under the Nitrous Forum. I want to say a 50 dry shot is going to be a real bang at some point. But you should do the reading and see what the NOS peeps say...

[djsin]

You can reflash the stock ecu and there is a switch and relay you can wire into the YOSH BOX connector to allow it to flip to the second map...talk to smithabusa or petrek they can get you pointed in the right direction....
ECU Flashing
http://busaecu.redirectme.net/
Instructions to install and setup FDT Flash programming software - ECU hacking
Renesas Technology - Flash Development Toolkit

[djsin]

definatly give one of these guys a pm ...your stock 2000 ecu may be a 16 bit and not the newer 32 bit one so your only option may be the pc2/pc3 with multi function hub and a switch, but that's why more expensive ...like say 600+$ for the hub and pc3