Need a map for PCIII USB - shorty exhaust

[orosado79]

I just got a hold of a free Powercommander 3 USB and am trying to install a map but nothing on the dynojet website seems to match my setup. I currently have dual hedman header hot tips on it which is basically a shorty pipe with some baffle in it. Eventually I want to get a Brocks full system, but until that day, I'll have to live with the current setup. Anybody know of a map that works good on shorty exhausts? Even an open slip ons map may do the trick since these are in essence open, with the exception of a small amount of baffle.

Any help from the gurus would be greatly appreciated.

 

[dadofthree]

You don't need anything IMHO, when you install the shortmeg Brocks provides a free map for you.

 

[Mr Brown]

If the motor is stock, use a 0 map. The tips you have are not performance enhancing at all, they just make it louder. You have a stock exhaust for map purposes. The brocks will come with a map as DO3 said, if you can't get the bike tuned that map will be fine.

 

[orosado79]

Thanks guys, I'll leave the stock map settings.