Modified Rear fender

Howabusa

Registered
Joined
Dec 16, 2006
Messages
115
Reaction score
1
I just installed a pair of smaller rear turn signals. I want to cut the rear fender and I'm wondering if anyone has pics of their modified stock fender? I'm not sure how much to cut off.
rock.gif

Howabusa

Registered
Joined
Dec 16, 2006
Messages
115
Reaction score
1
Thanks for the pics Powers. I guess I should have posted that i want to keep the signals in the stock location. I would like to mount the plate in the stock location or maybe move it up as high as possible.

dirty dave

Registered
Joined
Aug 13, 2007
Messages
86
Reaction score
0
Well i tryed to post a pic, I cut off rear fender and left a tab to re locate o.e. plate bracket a little higher and installed integrated signals.

Strife

Donating Member
Joined
Sep 15, 2006
Messages
2,773
Reaction score
18
There is options....

Left just enough of the  flap to attach the plate bracket to...
CutUndertail.jpg

RearofbikeafterSoupyslinksinstalled.jpg

Picture002.jpg

Jimmy c 6093

Registered
Joined
Oct 4, 2025
Messages
39
Reaction score
50
Hope I get an answer, as this is an old post.
I have a 2007 Hayabusa. Does cutting off the back of the rear fender, where the license plate mounts, cause the passenger to get a soaked back while riding on a wet road? Just wondering.
I've found that in order to remove the rear wheel easily, I have to get the bike pretty high up in the air. Looks like it'd be much easier with that "turn down" on the back of the rear fender gone. But don't want my girl getting extra wet on her back.
Thanks in advance.

Rojo

Registered
Joined
Oct 11, 2023
Messages
3,134
Reaction score
4,395
IMG_0097.webp

With your license plate mounted under the tail ~ should help out substantially with keeping wet residue from flinging upward *
Back
Top