Master Link

Hi just want to know what master link i could use on the oem chain.

OEM Suzuki chains are junk ~ mine didn't last 5000 miles . . .

eeeffe18-4ab7-4cc1-abe4-93d9664baf80_zps23cb8bf5.jpg


Just get a new chain . . .
 
My bike 2009 doesn't even have 5k miles on it. My powder coat my swing are is why i asked but thanks.
 
My 2009 bike doesn't even have 5,000 miles on it.

Powder coat my swing arm is why I asked but thanks.

That's why you should get rid of that junk OEM chain ~ unless you want it to fail & jack up more Hayabusa parts . . .

dscf8299-jpg.97735.jpg
 
14000 miles stock chain. Should mention that I am OCD about chain maintenance and as soon as I find a tight spot it will be replaced.
 
17000 miles on stock chain, changed due to knocking I fault was coming from chain , turns out there was nothing wrong with it and had loads of life left. Maintenance is the key
 
  • Like
Reactions: Ham
I would get oem link to go with oem chain,you don't want a potential weak spot.I adjust chain to 30 -35 mm of slack while on side stand to compensate for rider weight. The manual says 20-30mm
 
  • Like
Reactions: Ham
Back
Top