Man were you guys right about the oil pan part II

2hip

Registered
Joined
Jun 27, 2008
Messages
1,380
Reaction score
10
This is part two about the oil pan...couldn't have been luckier. After reading all of the recommendations about changing the oil pan while bike was stripped I went out to garage to pull the pan. At the last second the "Doubting Thomas" took momentary control...I just wish these other voices in my head would just go away...make note to myself to adjust medications:rofl: So, I said to my other self...after "we" drain the oil, let's just put the plug back in and test it...no sense, he says, in pulling the pan and the expenses if the plug held the first time...it'll be okay the second...right? After oil drained.. I inspected oil outlet hole with strong light and mirror. Noticed some pieces of aluminum thread at distal end of the plug..pulled them out with needle nose...hum, this can't be good...started steel bolt and went in okay...snugged it up finger tight and felt secure...Got torque wrench out and set it to 23 newtons per manual...I didn't go even a quarter turn and she started free-spinning...:banghead: Orgsters...thanks again for solid advice...Can you imagine if I had put the new muffler on and the plastics and then got a free spin out of the oil plan...you would have heard my primal scream in Missouri...2hip

Fastfrog007

Donating Member
Joined
Feb 9, 2009
Messages
13,096
Reaction score
48
Better now than later, Check with Goldenchild for a new pan.:thumbsup:

megawatt

Registered
Joined
Dec 1, 2007
Messages
1,343
Reaction score
25
Get a drain plug with holes drilled in for safety wire. You will rely on the safety wire to prevent the plug from backing out. You will never have to over torque the drain plug. They are not expensive and are aluminum. I use them on all my bikes.

2hip

Registered
Joined
Jun 27, 2008
Messages
1,380
Reaction score
10
yep...on the medical field...and Megawatt...that is one of the best solutions of this little misadventure...go to an aluminum plug and wire it in to it can't back out...thanks man,
2hip

Blanca BusaLess

Suffers from PBSD
Donating Member
Joined
Oct 7, 2009
Messages
23,678
Reaction score
4,991
WOULD THIS HAVE BEEN YOU.....

- Mötley Crüe - Primal Scream/Uncensored Version[/url]


"PRIMAL SCREAM AND SHOUT, RIP THAT MUTHA OUT"

Amode

Registered
Joined
Feb 10, 2009
Messages
830
Reaction score
54
Yes he is THE DOCTOR OF ALL THREADS.:whistle:

Amode

Registered
Joined
Feb 10, 2009
Messages
830
Reaction score
54
Yea do you ever wake up with Bull Frogs On Your Mind. :bowdown:

Merlot

Donating Member
Joined
Oct 30, 2008
Messages
1,630
Reaction score
2
You are really lucky thanks to those who gave you advice:beerchug:

aussiesuzukirider

Never Forgotten
Joined
Apr 25, 2009
Messages
3,226
Reaction score
10
Be careful, be very careful, of those little voice's.......they can get you into soooo much trouble:laugh:

2hip

Registered
Joined
Jun 27, 2008
Messages
1,380
Reaction score
10
Battled those little voices all my life..unfortunately, they seem to be winning the battle as of late:whistle:2hip

Haya01B

Registered
Joined
Sep 19, 2007
Messages
865
Reaction score
3
I had a steel plug installed at the local machine shop. Don't have to worry about that any more!
Back
Top