Lets talk about Gen 3 aftermarket swingarms

[Robert 0046]

If you change the oem for an aftermarket what brand you purchased how far you extended the bike? If you dont mind let us see the finished product.

[Robert 0046]

I mounted 0-4 Evil swingarm

[sixpack577]

I mounted 0-4 Evil swingarm

View attachment 1661028

I see a Vortex rear sprocket; are you running stock gearing?
Also, is that a 55 series rear tire, or does the stretch and lower stance just make the rear look taller?

[Robert 0046]

Its a 44 rear and 18 oem in the front its a 50 series rear tire yes the stretch and lower stance remember i took out the rear pegs maeby that helps.

I see a Vortex rear sprocket; are you running stock gearing?
Also, is that a 55 series rear tire, or does the stretch and lower stance just make the rear look taller?

[60+ Busa Rider]

I mounted 0-4 Evil swingarm

View attachment 1661028

You have a sexy ride there!

[Robert 0046]

You have a sexy ride there!

Thank you very much!!!

[60+ Busa Rider]

I mounted 0-4 Evil swingarm

View attachment 1661028

What is your opinion on the Brock’s Corbin seat, is it more comfortable than the stock seat?

[sixpack577]

Its a 44 rear and 18 oem in the front its a 50 series rear tire yes the stretch and lower stance remember i took out the rear pegs maeby that helps.

Yep, the no passenger pegs, that's the difference!

[Robert 0046]

What is your opinion on the Brock’s Corbin seat, is it more comfortable than the stock seat?

No but it looks way better ive driven other seats before the ones some people make and they are worst than the one i have not comfortable at all. Corbin can be driven but have in mind its a race oriented seat its not for comfort.

[TonyM995]

I bought an Evil 4-8” over and paid for them to press new bearings in. Had to send it back because the bushing wouldn’t fit inside the bearings. They kinda fixed one side but the other still wouldn’t fit so I just returned it and got my money back. Brenda at Evil was great to work with and she said they don’t really press the bearings in. She said they didn’t grind enough and the bearings were being squeezed in. All good and I appreciated her customer service.

My friend got an evil arm 0-4” on his zx10 and the pivot bearings didn’t spin at all. Evil said it was supposed to be like that.

I’ll probably buy a DME 2-6” over next.

[Fernando]

I mounted 0-4 Evil swingarm

View attachment 1661028

de show looks good brother

[Robert 0046]

de show looks good brother

Gracias mi hermano!!!

[Robert 0046]

I bought an Evil 4-8” over and paid for them to press new bearings in. Had to send it back because the bushing wouldn’t fit inside the bearings. They kinda fixed one side but the other still wouldn’t fit so I just returned it and got my money back. Brenda at Evil was great to work with and she said they don’t really press the bearings in. She said they didn’t grind enough and the bearings were being squeezed in. All good and I appreciated her customer service.

My friend got an evil arm 0-4” on his zx10 and the pivot bearings didn’t spin at all. Evil said it was supposed to be like that.

View attachment 1661035

View attachment 1661036


I’ll probably buy a DME 2-6” over next.

I havent got any problems with them and i have purchased a few

[TonyM995]

Brenda at Evil was great to deal with. I returned the first arm and they tried to fix it. When it came back and it wasn’t fixed I decided to return it for a refund. If all of their arms had that issue I’d think they wouldn’t be in business. I never said anything bad about the company and was just sharing my experience. They offered to build me a new arm but I decided to go a different route.

[SS4Luck]

I’m in an evil 0-4, I’ve gone back one more holy in the axle block since this picture. I’m debating on getting a 3-7/4-8 and going 5” back or so. 1st gear the nose still gets a little lighter than I’d like it too and it seems like some of the “fast fast” guys started 0-4 and are on 2-6 or more now that these bikes are getting figure out a bit more.

[_WOLFMAN_]

Haven't installed mine yet but have a DME Aluminum Swingarm going on my Gen 3 this spring. It's adjustable from 59-63" plan right now is to start at 62" wheelbase.