Horsepower gain

Devious

Onward through the Fog
Donating Member
Joined
May 5, 2005
Messages
2,019
Reaction score
9
I have a PCIII USB and a HMF Dual high mount exhaust system and went down 1 tooth on the front sprocket of on 'o5 Busa. No air box mods and still have the OEM filter. Do any of you guys have any idea how much of a Horsepower gain I might achieve with these mods. There is not a Dyno anywhere down here that I know of. At least not in a coupla' hundred miles. So I'm guessing here. Has any of you guys done something close to this to your bike and found out what the horsepower is after. I know all Busa's are a little different. So, again, just an educated guess from the board.

Thanks,

David
1zhelp.gif

frisbee

GODSPEED RACING
Donating Member
Joined
Mar 19, 2002
Messages
15,645
Reaction score
106
I'm sure someone has this set up . I would guess you got about an extra 10 ... so I guess 165rwhp. But i'm no expert , could be more depending on the map and other factors . Change the filter, remove the pair, and do the small airbox mod.

shenoyp

Hayabusa Master Jedi
Donating Member
Joined
Oct 23, 2004
Messages
7,148
Reaction score
1
If you have a good MAP you can look at about 10-15 HP... thats is if you have a custom map. If you dont have a tuner around you, I suggest you get a MAP from Quasar from Suzukihayabusa.org

busa boyz

Donating Member
Joined
Aug 9, 2005
Messages
448
Reaction score
0
05 busa :full yosh ,pair mod,pcIIIusb with dynojet map,stock filter 153.6.

busa boyz

Donating Member
Joined
Aug 9, 2005
Messages
448
Reaction score
0
yeah I know that is low with the mod so I'm taking it to a new tuner monday ....I will post results.

busa boyz

Donating Member
Joined
Aug 9, 2005
Messages
448
Reaction score
0
I just got the busa back from the local tuner he said that the previous dyno results (153) was lack of air circulation he put it on his and first pull was (161.2) and then he went to work on the cells ...3hrs.final pull after tune was (166) and the torque was (99.3).I will post dyno sheet tommorro.

MET

The Watcher
Registered
Joined
Feb 17, 2002
Messages
11,207
Reaction score
15
168-171hp with a free flow air filte to go along with the pipes and tune.

busa boyz

Donating Member
Joined
Aug 9, 2005
Messages
448
Reaction score
0
here are my #'s...red is before tune and blue is after tune.



<!--EDIT|busa boyz
Reason for Edit: None given...|1125538121 -->

post_11_14394_last_pull2.jpg

shenoyp

Hayabusa Master Jedi
Donating Member
Joined
Oct 23, 2004
Messages
7,148
Reaction score
1
05 busa :full yosh ,pair mod,pcIIIusb with dynojet map,stock filter 153.6.
...if your using the dynojet MAP the HP will be low!! Its not the best MAP you can get for your bike... its a pretty generic MAP. I had the dynojet MAP for my Muzzy before I got the quaser MAP... and I have to tell you in comparison to quaser's MAP the dynojet one sucked...

smile.gif

busa boyz

Donating Member
Joined
Aug 9, 2005
Messages
448
Reaction score
0
05 busa :full yosh ,pair mod,pcIIIusb with dynojet map,stock filter 153.6.
...if your using the dynojet MAP the HP will be low!! Its not the best MAP you can get for your bike... its a pretty generic MAP. I had the dynojet MAP for my Muzzy before I got the quaser MAP... and I have to tell you in comparison to quaser's MAP the dynojet one sucked...

smile.gif
I started with the dynojet map and then the tuner changed all kind 's of cells to create a new custom map.Are you saying that the map that my tuner created is still junk because it was started from the dynojet map ?

sully

Donating Member
Joined
Nov 24, 2004
Messages
588
Reaction score
1
in all reality most of our bikes stock will produce around 150 to 153 rwhp. that being said with the mods you have performed i would guess that around 160 with a downloaded map and you could prob salvage another 3 to 5 with a custom map. I was very disapointed when mine only pumped out 164 with a full yoshi, box mod, pair valve and custom map. I thought it would be much higher. Each dyno is different and it has alot to do with temp and air density so what a bike will dyno here where i am versus in the mountains of colorado are completely different, don't be mislead by seamingly low dyno results cause you still have a busa and everyone knows it is the king...

TheBus

Registered
Joined
Sep 15, 2005
Messages
1
Reaction score
0
From what I have read the HMF pipes are worth 13 hp at the wheel but that is manufacturer's claims.

bailey

Registered
Joined
Feb 10, 2002
Messages
25
Reaction score
0
My dyno before all my work was 146. After the mods was 151 and with tweaking the map went to 156.



<!--EDIT|bailey
Reason for Edit: None given...|1126828265 -->

GIXERHP

ok, ok...just a wee bit Irish...
Donating Member
Joined
Jan 24, 2003
Messages
14,088
Reaction score
2,980
From stock, at 155.6. Added a hindle race, with carbon can, pc3r, removed pair valve, all short stacks. I got up to 167.9. Then had a custom map done. and ended up at 173.1 on pump gas!!!
Back
Top