help with muzzy air shift

[dragonbusa]

need a little help with the install on muzzy air shift. Im running a PC111, and im a little lost on the two wires that go to the fuel injecters. the instructions say to interupt the 12 volt signal on the PC111 side of the injecters. any body done this in stall? Im fregging lost

 

[HotFoot]

Dragon
I have a 05
The red/white and white/red wires go to the connecter that feeds the
injectors
Trace the power wire from the injectors by back probing the power wire and then
trace it to the connector
use a small screw driver to get the termails out and then turn the key on
to find out which one is power from the relay and that one goes to red/white
So when you are done you will have two wires that will no longer be located
in the plastic connector
so to keep it "simple"  power comes in to the digi kill on the red/white and
goes out to fuel injectors va the white/red wire
The Digi Kill turns off the power to the injectors when air shifting for a split second
Schnitz Racing   1-800-837-9730
Let Me Know It You Need More Help

 

[HotFoot]

Dragon
Looks like the orange/white wire are the ones that come out
of the connector
so when you take them out and plug the connector back in
then turn the key on and find out which one is power the other one
goes to injectors

 

[dragonbusa]

thanks for the help, I"ll let you know how it goes.

 

[HotFoot]

Dragon
Took Some Pics For Ya
Hope It Helps

 

[HotFoot]

..

 

[HotFoot]

..