Gen 1 busa
- Thread starter erob_15
- Start date
Not an expert, search can be your friend, from memory there were some changes on early models, maybe stator, wiring harness. Experts will be along
Kiwi Rider
Registered
Good day!
You’ll need a 02 -07 flywheel rotor and reconfigure a couple of wires (switch positions of pins) into the ECU connector on the harness side. Oh and of course the 02 ECU needs to be fitted.
If you use the search function you should find all the info you need to do it…
Someone here will post up a link to thread I’m sure!
You’ll need a 02 -07 flywheel rotor and reconfigure a couple of wires (switch positions of pins) into the ECU connector on the harness side. Oh and of course the 02 ECU needs to be fitted.
If you use the search function you should find all the info you need to do it…
Someone here will post up a link to thread I’m sure!
Kiwi Rider
Registered
Here ya go… post no 4.
www.hayabusa.org
Gen 1 16 bit ECU swap to gen 2 32 bit ecu HELP | General Bike Related Topics
hi all Im from the uk and been reading this forum for a couple of months now :thumbsup: What im after is the information to change my Gen 1 16bit ecu over to a Gen 2 32 bit ecu (as i want to remap it ) Ecueditor ect , Im aware that i will have to change the ECU and the crank rotor , what else...
Similar threads
