mike miller
Registered
I've installed a stedman/rcc kit on my gen one 07, I'm in the process of setting base fuel pressure
I'm using walbro 255 ext and begi fmu. Even with the fmu center adjustment full out the lowest fp i get is 53 at idle. Im thinking the begi can't relieve fp fast enough with the high flow 255 pump. I've seen this happen before when nothing else but the pump was changed to 255. Anyone got any idea to lower that a bit. If not I'm going to use woolich and just take fuel away from the iap map to lean out the idle a bit
I'm using walbro 255 ext and begi fmu. Even with the fmu center adjustment full out the lowest fp i get is 53 at idle. Im thinking the begi can't relieve fp fast enough with the high flow 255 pump. I've seen this happen before when nothing else but the pump was changed to 255. Anyone got any idea to lower that a bit. If not I'm going to use woolich and just take fuel away from the iap map to lean out the idle a bit