Exhaust on 08 diameter?

[V8N3T]

Hi all, sorry to make a topic out of this but I want to get my ducks lined up now before I get my new 08. The exhaust on the 2008, what is the diameter on the mids? Cause I am going to run open headers again like on my 04. And instead of cutting them this time around I want to see if I can head on down to Autozone and possibly get a pair of slip on's. "The ones cut at a 45*degree angle". And pull from the stock mids, to the slip on's off and throw on the ones from autozone. Can anyone help me out with this?

And in relation to the tail. I noticed you can unbolt the stock mounting point instead of having to cut it all away like I did for my undertail on my 04. But is there any aftermarket parts for the license plate bracket? And or Lights for it?

Thanks for the help in pointing me in the right direction yall. "Oh and btw, I posted here cause the questions were specific to the 2008."

[V8N3T]

anyone? : [

[Bo_]

I built some that I am running using speedway megaphones and auto zone 45's. There is a thread started by me titled oval megaphones with pics https://www.hayabusa.org/forums/?act=ST;f=77;t=84546;hl=bo_

I have the diameters written down at home but from memory I think the two spigots coming from the catalytic converter are 1-3/4 od and the 45 was 1-7/8 od and the megaphone was 2" id.

Anyone interested in the ones I built, I am building some different ones.

[Lamb busa]

Is this the V8N3T that never calls Lamb back?
Is this the same V8N3T that dissapeared off the face of the earth after buying a new R6.

Does Lamb smell that bad?

Good to see you're still alive swabby

Call me punka$$!  FREAK!