Changing brake pads?

[renaldoaoa]

Looking for a step by step guide on changing out my front brake pads on an 02 busa. The last time I replaced (HH) the pads I watched my friend do one side and I did the other, but it's been quite some time since I've done it.

Any links or step by step guide would be GREATLY appreciated!
Thanks for the help!

 

[Powers739]

Unbolt them, (I usually use something at this point to wedge open the caliper wider so it will fit on the rotor with new pads) pull the little clip, pull the pin, remove old pads, reverse with new pads installed. Torque to the right values... make sure you squeeze the brake a few times before going for a ride...

Also, reference the manual which is hosted here for download, pretty simple...

 

[Powers739]

 

[Powers739]

 

[Powers739]

 

[Powers739]

 

[Powers739]

 

[Powers739]

Make sure you clean up the pins and the clip is in good condition before re-installing...

 

[BigBSBusa]

Here's a link that shows pretty much the same thing that Powers posted.  Changing Brake Pads

 

[renaldoaoa]

Thanks a bunch for the info, I really appreciate it!!

 

[99'busa]

Thanks a bunch for the info, I really appreciate it!!

for some reason I think your sig. is messing up every post that comes after you

 

[renaldoaoa]

Not sure what happened, but I deleted sig and all seems well. Thanks for pointing that out 99.