jumjum01
Registered
I made a small tool to help degreeing my stock gen1 cams. Its a 2 pcs. tool that can be 3dprinted. Lower part is placed on top of the cam lobes nearest the cam gear. I used a zip tie to keep it in place. Top part is placed in the cam gears teeth and act as a dial. Now you can read out an reference degree, press gear off, reposition gear, press on again. I needed to move my exhaust centerlobe 4 degrees, with is 2 degrees and cam gear degree scale (2:1).
I anybody is interested, I can email you the .STL files for 3dprinting and the 90 degree scale picture which has to be glued/taped on the top part.
I anybody is interested, I can email you the .STL files for 3dprinting and the 90 degree scale picture which has to be glued/taped on the top part.
