2019 flush bar ends?

[teak]

Hi all - I'm having a heck of a time finding OEM-type fitment for aftermarket bar ends for my 2019 Hayabusa. I just put on some Oxford carbon fiber bar ends, and am not happy with the quality and fitment. Can anyone recommend any bar ends that they are happy with?

[hayabuser]

Stock?

Suzuki bar ends are weighted to cancel engine vibes through the handlebars. Lots of R&D is spent on this stuff, why change them for cheap aftermarket parts?

[Klutch556]

Puig makes some decent ones

[murphc13]

Careful putting on aftermarket stuff.The stock stuff is heavy to lessen the vibrations that WILL cause wrist and elbow problems down the line if not used.
Sometimes stock is best.

[chobers]

Is there any way to use the stock bar ends with bar end mirrors?

[wreckwriter]

Is there any way to use the stock bar ends with bar end mirrors?

Yes. Just find mirrors with 6mm attachment, go to Ace and get long screws. Works perfectly.

[sixpack577]

If you don't like Busa bar-ends try the Gsxr's, as they are alot smaller.
You may/may not notice any new small vibrations through the handlebars.

[chobers]

I ordered some cheap-ish clamp-on mirrors I saw on Amazon, but they may look too rinky-dink.
Thanks for the other ideas.

[John O'Looney]

Hi all - I'm having a heck of a time finding OEM-type fitment for aftermarket bar ends for my 2019 Hayabusa. I just put on some Oxford carbon fiber bar ends, and am not happy with the quality and fitment. Can anyone recommend any bar ends that they are happy with?

You could have a play with turning your own bar ends if you have access to a lathe, perhaps get some tungsten that is heavy and you could make something special based on the OEM dimensions

[chobers]

Yes. Just find mirrors with 6mm attachment, go to Ace and get long screws. Works perfectly.

Howzabout these? They look okay. The cheap ones from Amazon work better, but they sit directly in front of the stock mirrors, which makes the bike look a bit nutty.

Classic HB chrome bar end hindsight mirror for Vespa | KiWAV

under bar or over bar, classic bar end mirror gives you 2 choices . It also gives you the rear view sight over your shoulder, to see wider and further.

kiwavmotors.com

[chobers]

[chobers]

Kind of looks like a birth defect.

[sixpack577]

Why not not an actual bar-end mirror?
You can get a cheap set on ebay for $15-$20, and that will tell you if you like the placement or not.
Some bar-ends can be mounted with the mirror above, beside, or below the bar's end.
If you want a quality mirror that doesn't vibrate, stays in place, and has a big and clear view, check out Oberon or Puig.

[wreckwriter]

Howzabout these? They look okay. The cheap ones from Amazon work better, but they sit directly in front of the stock mirrors, which makes the bike look a bit nutty.

Classic HB chrome bar end hindsight mirror for Vespa | KiWAV

under bar or over bar, classic bar end mirror gives you 2 choices . It also gives you the rear view sight over your shoulder, to see wider and further.

kiwavmotors.com

You gotta pull the stock mirrors off or it'll look dumb.

[John O'Looney]

i went with Gixxer k2 1000 mirrors
They are a straight swap and a thousand times better for quality and stability then the crappy OEM busa mirrors
I cannot recommend gixxer k2 mirrors as a straight swap enough - you never regret it